IR-Thermometer 1.0



Publisher Description



Now use your iPhone to measure the real temperature of the engine block of your car, the interior temperature of your freezer and the roasting temperature of your steak at the next barbecue grill! The IR thermometer app is suitable for contactless temperature measurements from -40 F to 250 F object temperature and -40 F to 185 F ambient temperature. IMPORTANT NOTE! For the real measurement of HMB is | TEC test adapter MLX-IR required. This adapter is simply plugged into the headphone jack and requires no additional power supply. The app is suitable for all iOS4.x iPhone, ipod touch. The measured value is in the form of realistic digital and analog measuring instruments with a resolution of 0.1 F/ C. In some screen can be displayed simultaneously both temperature values - the object temperature and the ambient temperature, both the minimum and maximum values. The peak values can be reset with a reset switch at any time. The course the object temperature over time is shown additionally in the form of a histogram, or Y/T diagram. Here, too, in addition, the extreme values are always recorded and reset. The temperature readings can either be in degrees Celsius or Fahrenheit.The setting is stored in the setup, so that these effects are selected each time needs can still be switched at any time very easily with a rocker switch on the main screen. The adapter used in the measuring sensor MLX60915 is calibrated at the factory, so no additional calibration settings are necessary. For the correction of various interfaces and object materials, a selection list is available with over 100 different calibration settings Mater IALI and their emission factors (emissivity) are available. Here in the simplest manner, the material impact will be corrected. For more than 90% of all measurements, however, no adjustment shall be made, as is the default emission factor of 0.95 applies here, so the emission factor will not be saved, so that automatically each time reverts to the default value is set. Important Note! This app is not a medical application and may not be used for human measurements

Requires iOS 4.2 or later. Compatible with iPhone, iPad, and iPod touch.


About IR-Thermometer

IR-Thermometer is a paid app for iOS published in the System Maintenance list of apps, part of System Utilities.

The company that develops IR-Thermometer is Holger Blümler. The latest version released by its developer is 1.0.

To install IR-Thermometer on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2011-03-14 and was downloaded 5 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the IR-Thermometer as malware if the download link is broken.

How to install IR-Thermometer on your iOS device:

  • Click on the Continue To App button on our website. This will redirect you to the App Store.
  • Once the IR-Thermometer is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
  • If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
  • After IR-Thermometer is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
  • Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.



RELATED PROGRAMS
Our Recommendations






BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 5
Updated At: 2024-03-20
Publisher: Holger Blümler
Operating System: Ios
License Type: Paid